How To Fix Spotify Error Code 18 in Windows Fully Updated

0/5 No votes

Report this app


Every Windows has Error Code 18 in Device Manager. Device Manager is an important tool for the user in the operating system as it allows them to see what hardware is attached to the computer. It can also allow diagnostic testing of what is wrong with components that are showing up as defective.

Therefore, Device Manager is a very important tool in every Windows and if it starts showing 18 errors, it is better to fix it as soon as possible so that further damage to your system. Other relevant error messages are: Error 18 or Error 12. Read this guide to find out how to fix this error.

Error Code 18

What Causes of Error Code 18?

As the error explains, Windows can neither recognize nor locate the drivers. To find out if this error is affecting you, go to device manager in Control Panel and look for hardware that shows a red outline or a yellow surprise. These indicate faulty devices. If error 18 is present, it will be displayed in the Properties box. Error Code 18 can occur when the system fails to recognize some drivers, they may have been installed incorrectly or corrupted. To resolve this issue, follow the steps below.

How to Fix Error Code 18 in Your Windows PC?

Are you experiencing error code 18? Can’t find a solution to this problem? Helping you solve this basic problem and solve this problem.

Error code 18 occurs whenever the HTTPS registration page fails. Errors also occur when there is a problem with the values ​​in the switch parameters in the Exchange Management Shell. This is when a state is assigned to a command. The malfunction can take other forms, including virus-related infections, system crashes, and system freezes.

Underlying Causes

The general reasons behind error code 18 are:

  • Operation timed out
  • Chrome error
  • Trouble loading URL

Here are 12 ways to help you fix error code 18 on a Windows PC. Try all the methods one by one to solve the root cause.

 Reinstalling Network Adapter

  • One way to fix error code 18 is to reinstall the system’s network adapter.
  • Open ‘Start’ menu and search for ‘Run’
  • Open ‘Run’ and type: ‘hdwwiz.cpl’ in it
  • Click ‘OK.’
  • Find and add a network adapter
  • Find the name of your network adapter
  • Note the name of the adapter
  • Right-click on it and click ‘Uninstall’
  • Once these installs are complete, restart / restart the system
  • Then reconnect to the network and test it
  • It is usually installed, otherwise install after downloading the adapter from the official site.
  • Reinstall the adapter and then run the test

Resetting TCP/IP

  • Open the ‘Start’ menu
  • Find the command prompt and open it
  • Type the following at the command prompt: ‘netsh int tcp redset resepcpip.txt’.
  • Press Enter ‘

Running Antivirus Program to Remove Malware

  • Open the ‘Start’ menu
  • Type ‘Microsoft Security Accessories’ and find and open it
  • Check the option ‘Complete’
  • Click “Scan Now”

Let the scan run and once done, close the window. Sometimes, error code 18 is caused by a malware attack on your Windows PC.

Manually Assign DNS Address

Another way to troubleshoot error 18 is to manually assign a DNS address using the following steps.

  • Open ‘Start’ menu then ‘Control Panel’
  • Press & open “Open Network, Sharing Center”
  • Open ‘Properties’
  • Find and click ‘Internet Protocol Version 4 (TCP / IPv4)’ in the popup
  • Click ‘Properties’
  • Check box against ‘Use the following DNS server addresses’
  • Set the following new values ​​in ‘Preferred and Alternate DNS Server’.

Preferred DNS Server:

Alternate DNS Server:

  • Check the box next to ‘Adjust settings when exiting’
  • Click ‘OK.’
  • It will take a few seconds for the settings to be saved

Resetting Browser Settings

You can also fix error code 18 by rearranging your browser settings.

  • Open the ‘Start’ menu
  • Open the web browser
  • Open ‘Settings’
  • Click ‘Show advanced settings’
  • Find and click ‘Reset Browser Settings’
  • Close the tab and this should help fix the code 18 issue.

Reset/Restart the Router

You may also be able to troubleshoot error code 18 by resetting or restarting the router.

  • Open the router and click the reset button.

Delete Line within Hosts File

  • Open ‘Notepad’
  • Open ‘File’ and then click ‘Open’
  • This should open the popup
  • Then open the following location inside the box: My Computer> Local Disk C:> Windows> System 32> Drivers> etc.
  • Check the bottom right and click File Type
  • Click on the “All Files” option
  • Press on the hosts file and open it
  • Check any Facebook URL that doesn’t open
  • Delete line (this particular line must be deleted, and none)
  • Click Save
  • Close Notepad
  • Restart Windows PC

Disabling/Turning Off Firewall

Another way to fix Error Code 18 is to close or disable the Windows Firewall.

  • Open ‘Start’ menu then ‘Control Panel’
  • Open Windows Firewall
  • Press on the ‘Turn Windows Firewall on or off’ option.
  • Check the box next to ‘Shut down Windows Firewall (not recommended)’.
  • Click ‘OK.’

Changing Internet LAN Settings

You can also fix error code 18 by changing Internet LAN settings. Make sure the proxy server is working properly. This can be done either by checking with the network administrator or by checking the proxy settings yourself.

To use a proxy server, use the following steps:

  • Open the Chrome browser
  • Click ‘Settings.’
  • Click ‘Show advanced settings’
  • Click ‘Change proxy settings.’
  • Open ‘LAN Settings’
  • Use a proxy server for your LAN.
  • Close the tab and this should help fix error code 18

Install Essential Certificate

Many times the main reason for error code 18 is the absence of the required certificate. Install the required certificate using the following steps:

  • Open the ‘Start’ menu and ‘Internet Explorer’
  • Click on ‘Internet Options’
  • Click ‘Content.’
  • Open the ‘Certificate’ option
  • Click on ‘Intermediate Certificate Authority’
  • Click ‘Import and Install Import Certificate File’.
  • You can also get it directly from a Wi-Fi provider
  • Click ‘Apply’ and ‘OK’ and it’s done
  • Restart Windows PC

Flushing the DNS using Command Prompt

  • Open the ‘Start’ menu
  • Open command prompt after searching for ‘CMD’
  • Type: ipconfig / flushdns and press ‘enter’

Let the command run & then close the tab. When you flush DNS, it has a much higher chance of fulfilling its basic potential and correcting error code 18.

Clearing Browser Cookies & Cache

  • Open the browser
  • Open ‘Settings’ or Open ‘History’
  • Click ‘Clear Browsing Data.’
  • Check the box against ‘cookies’ and ‘catches’
  • You can also check other options to delete them
  • Click on the drop down menu
  • Click on the “From scratch” option
  • Click the ‘Clear Browsing Data’ button
  • Deleting will take some time. If this is the root cause, error code 18 can be corrected by clearing the cookies and cache.
  • Now here are 12 different ways you can fix us error code 18. The procedure will depend on the underlying problem.

Leave a Reply

Your email address will not be published. Required fields are marked *